Last year, one of our most popular articles was a product review of all-in-one touch terminals. For that review, we worked with Greg Nelson, CTO of VAR and ISV GWare, who tested seven different units. To level our playing field, we asked each vendor for a unit that met a certain spec we wanted as a baseline. Price was not a consideration. Nelson conducted a series of tests and, in the end, we discussed the highs and lows of all the units reviewed.
This year, we wanted to do something a little different. Specifically, we received feedback from readers that, while they enjoyed reading about powerful machines going head-to-head, they often get asked by customers for low-priced options. Therefore, this time we asked each manufacturer to send us its best (highest spec) unit that was under $1,300 dealer cost. We didn’t care so much about the other specs. In the end, we were going to see who provides the most bang for the buck.
Some manufacturers opted to skip this review, because they claimed to not sell on price. Some didn’t have a unit at that price point. Fair enough. Others followed our instructions and sent us a $1,300 unit. And some sent us very affordable units. How affordable? One of the units tested is almost half the cost of the $1,300 max. In the end, we received units from Touch Dynamic, GenPOS, Aures/J2, NEC, POSBank, and Pioneer POS. Oh, and we also included a Harbortouch unit to see how the “free” POS variety stacks up.
We once again partnered with Nelson to conduct our testing. Last year, Nelson wrote a custom application he could run on each unit to stress the processor. He conducted tests on the touch screen sensitivity. He commented on the fit and finish of each and the ability (or lack thereof) of each unit to be serviced in the field. He commented on the software and configuration of each unit. Finally, he even made some tweaks and recommendations. He did the same for this review.
The first step in our review was to test the processors/performance of the units. Nelson installed his custom application that read and wrote large chunks of data to an SQL database. The goal was to monitor the processor and network utilization and see how quickly each could complete the test.
The Pioneer POS unit was the fasted tested, coming in at 49 seconds. The Touch Dynamics unit came in at 57 seconds. That said, don’t get too hung up on the numbers. All the units performed at a level adequate to be used in real-world environments. In fact, every unit tested this year performed as well as, or better than, all the units we tested last year (including units from NCR and HP).
Another interesting note of comparison between last year’s test and this year’s is the introduction of SSD memory. The Touch Dynamic unit shipped with a good old-fashioned SATA drive, while some others had SSD. The result? The SSD units booted very quickly, but beyond that, there were no performance improvements. Until ISVs code to take advantage of SSD memory, there’s not much value. To satisfy his curiosity, Nelson performed some registry tweaks to make additional use of the SSD memory. The result was a 20 to 35 percent speed increase in the test results.
The draw and screen test had similar results. Nelson performed a series of touch-and-drag gestures and noted the lag experienced. The Touch Dynamic unit was the only one that showed any signs of lag. Upon inspection, Nelson found that the unit was using the generic plug and play drivers for video. In fact, he learned that all the units shipped with generic drivers. After installing the proper drivers, screen performance increased. We saw similar things last year. “Whose job is it to make these units shine?” asks Nelson. “I think the manufacturers need to install the right drivers and ensure customers are getting the most for their money.” The reality is that a properly “tuned” machine will outperform a higher spec’d and priced competitor that’s using plug and play drivers and not optimized.
Fit, Finish, Repairs
This is where things get a little subjective. We trust Nelson, as an industry veteran, to apply reasoning and his experience to determine whether he’d want to service the units in the field or on a bench back at the office. While all the manufacturers might claim their units could be worked on in the field, practicality would dictate otherwise.
Nelson found that the Touch Dynamic unit was built in a way to allow servicing in the field. Some of the units tested were not built in such a way.
Two of the units tested had built-in receipt printers. While the additional functionality is nice, particularly considering it’s included in our test’s pricing requirement, Nelson took issue with the printers. It’s not that they don’t perform well; it’s that they get in the way of the screen tilting. It seems that in an effort to squeeze in the integrated printers, the designers had to make some concessions. The Pioneer POS screen will actually bottom out on the printer as you try to tilt to 90 degrees. The Touch Dynamic screen can’t go to 90 degrees, either. This might be a nonissue for your customers, but it’s a good thing to be aware of if the terminals are going to be used at heights requiring a 90-degree viewing angle.
Additional Notes, Closing Thoughts
The Touch Dynamic Breeze was one of the best performers in our speed and performance tests and an all-around good unit. Nelson’s biggest complaints were the lag seen in his draw tests and how the integrated receipt printer seemed to interfere with the screen’s ability to tilt. The cost of the unit tested was just over our limit at $1,350.
So, who has the best? Nelson has his favorites, but his reasoning might differ from yours. When pushed, here’s what he recommended. For grocery settings, he’d feel comfortable using the GenPOS, NEC, or Touch Dynamic unit (once he installed the right drivers). For retail, he thought all were good enough for mom-and-pops or boutique settings. For busier stores, he’d recommend GenPOS, NEC, or the POSBank unit. Finally, for restaurants, he’d recommend the Pioneer POS and Touch Dynamic units (although all the others would be fine in restaurants as well).